BioMAX™ CS
Minipleat HEPA Filters for Clean Rooms and High Purity Applications
BioMAX CS filters are engineered to provide the optimum combination of efficiency and airflow. They are used in a wide range of applications, including pharmaceutical facilities, hospitals, biotech laboratories and other environments where control and removal of airborne contaminants is of paramount importance in the protection of people, processes, and equipment.
Compact minipleat design saves energy
BioMAX CS filters are manufactured with a specialized thermoplastic adhesive bead (no
aluminum separators) to maintain proper pleat separation and full utilization of the filter media. Precise spacing of the glue-bead separators ensures low resistance to airflow and reduced energy costs to the user.
Multiple efficiency options
Each minipleat pack is sealed into the filter frame with a white urethane adhesive designed specifically for high efficiency air filtration. BioMAX CS and V2000 filters are available in multiple efficiencies: 99.97%, 99.99%, and 99.999% on 0.3 microns.
BioMAX CS Models
Gel Seal
Constructed with a built-in channel in the filter frame which contains a non-flowing, non-hardening urethane gel sealant. Designed for framing systems and housings equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage. Biomax CS with Gel Seal are available in cell side (filter frame) depths of 4-3/4″.
Neoprene Gasket Seal
Constructed with a 3/4″ wide x 1/4″ thick closed cell neoprene gasket. Designed for “lay-in” frame systems requiring filters with gaskets of this type. The filter should be secured into the holding frame by a clamping mechanism to prevent leakage. Standard models are furnished with the gasket on the downstream face of the filter. Gaskets can be placed upstream or on both sides of the filter upon request. BioMax CS with Gasket Seal are available in cell side (filter frame) depths of 2-3/4″.
(Also available with wood cell sides upon request).
Reverse Gel Seal
Constructed with built-in gel channel located at the back of the upstream side of the filter. Placing the channel in this position enables the BioMax CS filter to fit into the housing to save space. Access to the filter is from the room side of the unit. Designed for housings and ducted modules equiped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage. Excellent replacement filter for permanently installed ducted ceiling modules.
BioMAX™ V2000
High Capacity Minipleat HEPA Filters
Neoprene Gasket seal
High capacity design (300 sq. ft. of media in a 24x24x12″ frame) enables the filter to operate at 500 FPM with initial resistance of 1.20″ W.G. Standard models are furnished with the gasket on the downstream face of the filter. Gaskets can be placed upstream or on both sides of the filter upon request. Constructed with ten individual minipleat packs secured in a specially designed sheet aluminum v-bank frame.
